home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Belgian Amiga Club - ADF Collection
/
BS1 part 65.zip
/
BS1 part 65
/
Draw 2000 v2.62 disk1.adf
/
ReadMe!
< prev
next >
Wrap
Text File
|
1991-07-13
|
1KB
|
45 lines
This is the official release of Draw 2000 Rev. 2.62
This disk is a "bootable" version of Draw 2000. It
contains everything you need to start the program. All
that you need to do is insert the disk in your disk drive
and reboot your system.
You can install Draw 2000 on your hard drive by
double-clicking the Install icon.
If you have a standard Amiga (without the 68881 or 68882
math co-processor), you MUST use the Draw2000 version of
this product. On the other hand, if you have a math
co-processor (which your operating system recognizes)
then you may use either the Draw2000 version or the
Draw2000M version. The Draw2000M version takes advantage
of your math co-processor and delivers a noticably faster
response.
NOTE: If you do not have a math co-processor and you try
to use Draw2000M, your system WILL receive a visit from
the GURU!!!
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
For those of you who have hard drives and prefer to do a
manual installation, you can boot normally, and then
insert the disk in a floppy drive and copy the files you
need to your SYS: disk.
This version of Draw 2000 requires the following files,
in the proper directories:
"draw-configuration" and "draw.mountlist" must be in your
DEVS: drawer
"plt-handler" must be in your L: drawer
"stroke.font" must be in your FONTS: drawer
all the files in the "Draw2000" drawer must be copied to
a drawer on your hard drive. (I suggest a drawer
named "Draw2000")